Mitel 6800 Series, Administrator'S Manual, Page: 138 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
3-67
CONFIGURATION SERVER SETTINGS
The configuration server stores the firmware images, configuration files, and software when
performing software upgrades to the IP phone. An administrator can configure the following
parameters for the configuration server:
PARAMETER
IN
IP PHONE UI PARAMETER IN
MITEL WEB UI PARAMETERS IN
CONFIGURATION
FILES DESCRIPTION
DOWNLOAD PROTOCOL SETTINGS
Download
Protocol Download
Protocol download protocol Protocol to use for downloading new
versions of software to the IP phone.
Valid values are:
TFTP
FTP
HTTP
HTTPS
Note:
For DHCP to automatically
populate the IP address or domain name
for the download servers, your DHCP
server must support Option 66. The IP
phones also support Option 60 and 43.
For more information, see Chapter 4, the
section,
“DHCP” on page 4-4.
For more information about download
protocols on the IP Phone, see Chapter
4,
“Configuration Server Protocol” on
page 4-101 .
Primary TFTP TFTP Server tftp server The TFTP server’s IP address or
qualified domain name. If DHCP is
enabled and the DHCP server provides
the information, this field is automatically
populated. Use this parameter to change
the IP address or domain name of the
TFTP server. This will become effective
after this configuration file has been
downloaded into the phone.
For more information, see Chapter 4,
“Configuration Server Protocol” on
page 4-101 .