Mitel 6800 Series, Administrator'S Manual

Page: 767 / 1113

Operational, Basic, and Advanced Parameters
A-25
PARAMETER –
http port
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Specifies the HTTP port that the server uses to load the
configuration to the phone over HTTP.
Note:
For DHCP to automatically populate this parameter, your
DHCP server must support Option 66.
FORMAT
Integer
DEFAULT VALUE
80
RANGE
1 through 65535
EXAMPLE
http port: 1025
PARAMETER –
https server
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
The HTTPS server’s IP address. This will become effective after this
configuration file has been downloaded into the phone.
Optional
: You can also assign an HTTPS relative path to the HTTPS
server. See the next parameter (
https path
).
Note:
For DHCP to automatically populate this parameter, your
DHCP server must support Option 66.
FORMAT
IP address or Fully Qualified Domain Name
DEFAULT VALUE
0.0.0.0
RANGE
N/A
EXAMPLE
https server: 192.168.0.143
PARAMETER –
https path
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
The HTTPS path name to enter.
If the IP phone’s configuration and firmware files are located in a
sub-directory beneath the server’s HTTPS root directory, the relative
path to that sub-directory should be entered in this field.
FORMAT
dir/dir/dir
DEFAULT VALUE
N/A
RANGE
Up to 256 alphanumeric characters
EXAMPLE
https path: ipphones/6869i