Mitel 6800 Series Administrator'S Manual Download Page 741

Page: 741 / 1113

Troubleshooting Solutions

9-29

HOW DO I LOCK AND UNLOCK THE PHONE?

6863I/6865I:

Lock the phone:

Press

on the phone to enter the Options List.

Select

Phone Lock.

The prompt, “

Lock the phone

?” displays.

Press

Lock

to lock the phone.

Unlock the phone:

Press

on the phone to enter the Options List.

The prompt, “

To unlock the phone...Password:

”

Enter the user or administrator password and press

Enter

The phone unlocks.

6867I/6869I:

Lock the phone:

Press

on the phone to enter the Options List.

Select

Lock > Phone Lock.

The prompt, “

Lock the phone

?” displays.

Select

Yes

to lock the phone.

Unlock the phone:

Press

on the phone to enter the Options List.

An “Enter Unlock Password” prompt displays.

Enter the user or administrator password and press

Enter

. Default is “

22222

”.

A prompt “Unlock the Phone?” displays.

Select

Yes

to unlock the phone.

6873I:

Lock the phone:

Press

on the phone to enter the Options List.

Press the

Lock

icon.

IP PHONE UI

Summary of Contents for 6800 Series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6800 Series

Reviews:

Mitel 6800 Series, Administrator'S Manual, Page: 741 / 1113

Search results

Summary of Contents for 6800 Series

Reviews: