Mitel 6800 Series, Administrator'S Manual

Page: 803 / 1113

Operational, Basic, and Advanced Parameters
A-61
BACKLIGHT MODE SETTINGS
PARAMETER –
dst end hour
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
The hour that DST ends. Valid values are an integer from 0
(midnight) to 23.
FORMAT
Integer
DEFAULT VALUE
N/A
RANGE
0 (midnight) to 23
EXAMPLE
dst end hour: 23
Note:
The parameter "
backlight mode
" is applicable to the 6865i IP phone only while
the "
bl on time
" parameter is applicable to the 6865i, 6867i, 6869i, and 6873i IP phones.
PARAMETER –
backlight mode
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Allows you to turn the backlight on the LCD, Off (always off) or Auto.
The “Auto” setting sets the phone to turn off the backlight after a
period of inactivity. You can set the amount of time before the
backlight goes off using the “Backlight on Time” option (“bl on time”
parameter).
FORMAT
Integer
DEFAULT VALUE
1 (Auto)
RANGE 0
(Off - Turns the backlight off constant)
1
(Auto - Turns the backlight off after a period of inactivity.)
Note:
In the IP Phone UI, the options for this parameter are “Off” and
“Auto” only.
EXAMPLE
backlight mode: 0
PARAMETER –
bl on time
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Allows you to set the amount of time, in seconds, that the backlight
stays ON before turning OFF because of inactivity.
Note:
For the 6865i, the backlight mode must be set to "Auto" before
this parameter can take effect.
FORMAT
Integer
DEFAULT VALUE
600 seconds (equals 10 minutes)
RANGE
1-36000 seconds
EXAMPLE
bl on time: 15