Mitel 6800 Series, Administrator'S Manual, Page: 940 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
A-198
The following table identifies the language code to use for the IP phone language packs.
You can use this parameter in three ways:
• To download no language packs
• To download a language pack(s) from the original configuration
server
• To download a language pack(s) from another specified server
Notes:
• The languages packs you load are dependent on available
language packs from the configuration server. For more
information about loading language packs, see
“Loading
Language Packs” on page 5-52 .
• You must reboot the phone to load a language pack.
• To download a specific file, the string value MUST HAVE A
FILENAME at the end of the string. For example:
language 1:ftp://admin:admin!@1.2.3.4:50/path/lang_de.txt
where “path” is the directory and “lang_de.txt” is the filename. If
you do not specify a filename, the download fails.
See examples for each below.
FORMAT
lang_<ISO 639>_<ISO 3166>.txt
or
lang_<ISO 639>.txt
Note:
For valid values for <ISO 639> and <ISO 3166>, see
“Language Codes (from Standard ISO 639)” on page A-199 and
“Country Codes (from Standard ISO 3166)” on page A-200 .
DEFAULT VALUE
N/A
RANGE
N/A
EXAMPLE
The following example downloads no language pack file:
• language 1:
The following example downloads the German language pack to the
phones from the original configuration server:
• language 1: lang_de.txt
The following example uses FTP to download the firmware file
“lang_de.txt” (German language pack) from the “path” directory on
server 1.2.3.4 using port 50:
• language 1:ftp://admin:admin!@1.2.3.4:50/path/lang_de.txt