Mitel 6800 Series, Administrator'S Manual, Page: 752 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
A-10
NETWORK SETTINGS
PARAMETER –
dhcp
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Enables or disables DHCP. Enabling DHCP populates the required
network information. The DHCP server serves the network
information that the IP phone requires. If the IP phone is unable to
get any required information, then you must enter it manually. DHCP
populates the following network information:
IP Address, Subnet Mask, Gateway, Domain Name System (DNS)
servers, TFTP, HTTP, HTTP Port, HTTPS, HTTPS Port, and FTP
servers, and Timer servers.
Note:
For DHCP to automatically populate the IP address or qualified
domain name for the TFTP server, your DHCP server must support
Option 66.
FORMAT
Integer
DEFAULT VALUE
1 (enabled)
RANGE
0 (disabled)
1 (enabled)
EXAMPLE
dhcp: 1
PARAMETER –
ip
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
This parameter assigns a static IP address to the IP phone device.
Note:
For DHCP to automatically populate this parameter, your
DHCP server must support Option 66.
FORMAT
IP address
DEFAULT VALUE
0.0.0.0
RANGE
N/A
EXAMPLE
ip: 192.168.0.25
PARAMETER –
subnet mask
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Subnet mask defines the IP address range local to the IP phone.
Note:
For DHCP to automatically populate this parameter, your
DHCP server must support Option 66.
FORMAT
IP address
DEFAULT VALUE
255.255.255.0
RANGE
N/A
EXAMPLE
subnet mask: 255.255.255.224