System Preparation 3-23
3.7.3 Touchscreen
Adjust through the touch screen
1. Mode displaying area (or main functional tabs): displays the current modes, touch
the tab to enter the mode.
2. Other application mode entrance: displays the available application modes related;
tap to enter the modes.
3. Parameter adjusting area: displays the parameters in the current imaging mode or
function.
z
Parameter magnitude setting: tap
►
or
◄
to increase/ decrease the value.
z
ON/OFF setting: some of the parameters only can be set at ON or OFF, ON is to
activate the function, and when the function is activated, the key is highlighted in
green.
z
Page selection: if there is more than 1 page for the current mode, tap
to turn the pages.
z
Functional item: tap to go to the corresponding function.
4. Knob-adjusting area: displays the knob-controlled parameters.
There are five knobs at the bottom of the touch screen; their functions vary with the
current menu. Press or rotate the knobs to adjust the corresponding parameters.
Control
Panel
Adjust through trackball, control panel key, deflector rod, knob or slider.
Trackball function keys
In some certain mode, you need to use both the trackball and the trackball function
keys to adjust.
For instance, in Color mode, use the trackball and the trackball function keys to
adjust ROI size/position.
1
2
3
4
