10-16 Patient Data Management
When the task management icon displays as
, it means no task is undergoing
or failed.
DICOM Service Setting
In the Storage Task and DICOM Print Task page, click [Service Setting] to enter the
DICOM service setting screen. For details, please refer to DICOM chapter.
Troubleshooting
z
If any serious error occurred like network disconnection or operation timeout, the
system can try to reconnect the network. The interval time and maximum retries
can be set, for details, please refer to DICOM chapter.
10.9 Administration
10.9.1 Access
Setting
The system support two types of users: the system administrator and operator.
Administrator
The system administrator can view all patient data, such as patient information,
image and report, etc.
Operator
The operator can only view the exam information saved in the system and operated
by himself or herself, such as patient information, image and report, etc. The
operator cann’t view the exam data operated by others.
10.9.2 Setting
Access
Control
The system administrator can preset the access control, that is, if an operator has the
right to access to the data in the system.
The access control only can be set by the system administrator.
Setting access control:
1. Open the “Admin” page through the path: [Setup]
Æ
[System Preset]
Æ
[Admin].
2. If
is selected, you need to have the authority before
accessing the data. If unselected, you can access all the data without the authority.
10.9.3 System
Login
If access control has been set by the system administrator, you can access the data in
the system only after you log on the system.
You need to enter user name and password in the following cases:
z
Before entering the system
z
Changing user
You need to login again after system restart or dormancy.
Log on the system:
(1) The following dialogue box pops up:
