System Maintenance 16-1
16
System Maintenance
Routine system maintenance shall be carried out by the user. System maintenance after
the warranty has expired is the full responsibility of the owner/operator.
The responsibility for maintenance and management of the product after delivery resides
with the customer who has purchased the product.
If you have any questions, please contact Mindray Customer Service Department or
sales representative.
WARNING:
1. Only an authorized Mindray service engineer can
perform maintenance not specified in this operator’s
manual.
2. For the sake of the system performance and safety, you
should perform periodical checks for the system.
16.1 Daily
Maintenance
You are responsible for daily maintenance.
16.1.1 Cleaning the System
WARNING:
1. Before cleaning the system, be sure to turn off the power
and disconnect the power cord from the outlet. If you
clean the system while the power is “On”, it may result in
electric shock.
2. DO NOT directly spray solution onto the monitor, system
control panel or hard surfaces that is under pressure or
pumped. Ingress fluid leakage into the monitor or system
can damage the monitor or system, causing possible
electric shock or system failure.
CAUTION:
Do not spill water or other liquid into the system while you
perform the cleaning. Otherwise it may result in malfunction or
electric shock.
NOTE:
1. DO NOT use hydrocarbon glass cleaner or cleaner for OA (Office
Automation) equipment to clean the monitor. These substances may cause
deterioration of the monitor.
2. Please clean the control panel periodically, otherwise the button may be
blocked by dirt and the system will be buzzing while the button makes no
response.
