Patient Data Management 10-13
h
Click [Empty Recycle Bin] to empty the recycle bin and all items can never
be restored again.
(2) Click [Exit] to exit Recycle Bin screen.
10.5 iStorage
iStorage is used to save image files and measurement reports to the remote PC server.
Open “[Setup]
Æ
[Network Preset]
Æ
[iStorage]” to set the iStorage settings.
1. Enter the iStation screen. Select one (or more than one) patient data or image in the
local data source.
2. Click [Send Exam].
3. Select [iStorage] in the Send To dialog box and select the PC server on the right.
4. Select PC transfer format to send the report.
5. Click [OK] to start sending.
10.6 Print
10.6.1 Setting
Print Service Setting
(1) Open the [Setup]
Æ
[Print Preset], select an existed printer service in the list.
(2) Select the printer type in the Property box.
(3) Set printing properties.
(4) Click [Save] to confirm the setting and exit the preset page.
User-defined shortcut key for printing
To use [Print] key on the control panel of the system, you should:
(1) Press the [Setup] key to show the Setup menu, click [System Preset] item to open
the [System Preset] screen, and click [Key Config] tab.
(2) Click to select [Print] on the left side. Click to select desired print method in the
right side.
(3) Click [Save] to exit the preset and make the settings effective. Press the [Print]
key on the control panel to print.
Video output settings:
Open [Setup]
Æ
[System Preset]
Æ
[General], then select the image output mode.
Open [Setup]
Æ
[System Preset]
Æ
[General], then select the image storage size.
10.6.2 Image
Image printing is mainly performed by video printer, and for DICOM image printing, refer
to DICOM chapter.
1. Select the desired image in iStation or Review screen.
2. Click icon on the upper right side of the image, and select the printer in the popped
up dialogue box.
3. Click [OK] to start printing.
Please refer to the accompanying manuals of the printers for more details.
