Mindray BeneHeart D2, Operator'S Manual

Page: 21 / 208

Defibrillator/Monitor Operator’s Manual 2 - 1
2
The Basics
2.1 Equipment Introduction
The BeneHeart D3/BeneHeart D2 Defibrillator/Monitor (hereinafter called the equipment) is a lightweight and
portable defibrillator/monitor. It provides four operating modes: Monitor, Manual Defib, AED and Pacer.
■ Monitor Mode
In the Monitor mode, the equipment is intended for monitoring, displaying, reviewing, storing and printing
multiple physiological parameters and waveforms including ECG, pulse oximetry (SpO
2
), respiration (Resp),
pulse rate (PR), non-invasive blood pressure (NIBP) and carbon dioxide (CO
2
).
■ AED Mode
In the AED mode, the equipment automatically analyzes the patient’s ECG rhythm and indicates whether or
not a shockable rhythm is detected. Voice prompts provide easy-to-follow instructions and patient
information to guide you through the defibrillation process. Messages and flashing buttons are also
presented to reinforce the voice prompts.
■ Manual Defib Mode
In the Manual Defib mode, the operator analyzes the patient’s ECG, and, if appropriate, follow this
procedure:
1. Select the Manual Defib mode, adjust the energy level if necessary;
2. Charge; and
3. Deliver the shock.
Defibrillation may be performed through electrode pads, external and internal paddles. In the Manual
Defib mode, you can also perform synchronized cardioversion. If desired, use of Manual Defib mode may
be password protected.
■ Pacer Mode
The Pacer mode offers non-invasive transcutaneous pacing therapy. Pace pulses are delivered through
electrode pads. Use of Pacer mode may also be password protected.
The equipment can be powered by smart lithium ion batteries which are rechargeable and maintenance-free.
You can easily determine the remaining battery charge by viewing the battery power gauge displayed on the
screen or by checking the indicator on the battery itself. An external AC mains or a DC power supply connected
through a DC/AC adapter may also be used as a power source and for continuous battery charging.
The equipment can be connected to a Central Monitoring System (hereinafter called CMS) through wired and
wireless networks.
The equipment automatically stores patient data in an internal storage card. You can also export the data
through the USB port for viewing and editing on a PC through the data management software.
2.2 Intended Use
The equipment is intended for external defibrillation, internal defibrillation, synchronized cardioversion and
semi-automated external defibrillation (AED). It can also be used for non-invasive external pacing as well as ECG,
SpO
2
, Resp, PR, NIBP and CO
2
monitoring.
The equipment is for use in hospital and pre-hospital settings by qualified medical personnel trained in the
operation of the equipment and qualified by training in basic life support, advanced cardiac life support or
defibrillation.
The equipment is intended to be used by qualified medical personnel trained in the operation of the equipment
and qualified by training in basic life support, advanced cardiac life support or defibrillation.