MIMAKI TEXTILE JET TX1800B, Operation Manual

Page: 79 / 222

Printing Data
2-39
1
2
Basic Operation
s
4
5
6
Suspending printing operation
Perform the following operation when stopping a printing operation halfway.
1
Press the key during printing.
• The printing operation stops.
• Printing restarts from the interrupted data by repressing the
key.
Deleting Received Data (Data Clear)
If you want to cancel printing, stop the printing operation, and delete the received data.
1
Press the key in LOCAL.
2
Press the key.
• The received data is deleted, and the present mode returns
to LOCAL.
Correcting the feeding quantity of the fabric while printing
Even if you perform the printing using the same kind of fabric, the printing could not be made beautifully with
the feed quantity set by the obtained value through the media correction due to the difference in yarn count or
weaving method.
When stripes appear in the printed image while printing, make the corrections performing the following steps.
1
Press the key during printing.
• Displays the current correction value.
2
Press the key.
• Displays the correction value input screen.
3
Press to change the correction value.
• Make corrections viewing the outcome of the printing.
• Make judgment from the result obtained after 4 scans (for 4-
pass printing) or 8 scans (for 8-pass printing).
4
Press the key twice.
• The new correction value is saved.
< LOCA L . * > [ # * * ]
w i d t h : 1 2 7 2mm
DA T A C L EAR
< ENT >
* * DA T A C L EAR * *
F e e d C omp . 0
A d j u s t : e n t
F e e d C omp . 5
A d j u s t = 0
F e e d C omp . 5
A d j u s t = - 2
Correction value
before changing
Input value
(current correction value)