MIMAKI TEXTILE JET TX1800B, Operation Manual

Page: 169 / 222

Troubleshooting
5-3
1
2
3
4
5
T
roubleshooting
Image Quality Is Poor
This section describes the corrective actions to be taken in case the image quality is not satisfactory. Take
appropriate measures to remedy the problems with image quality. If the remedy does not work, contact your
distributor or our service office.
Failure phenomenon Solution
White lines or slight touching of
ink occurs (for head moving
direction).
(1) Execute head cleaning. P.2-37
(2) Perform maintenance of the inside of the station. P.4-3
(3) Execute the [Media correction] function. P.3-4
(4) Change the drawing mode of RIP. P.3-11
Disagreement in print positions
between outward trip and
homeward trip.
(1) Execute the [Dot position correction] function. P.4-22
The respective color ink injected
by the respective color heads do
not properly overlap
(1) Execute the [Dot position correction] function. P.4-22
(2) The head height is too high. Use it with making the height within 3mm.
P.2-32
Slanted blocky stripes (moire
fringes) are generated.
(1) Perform “Media correction” function. P.3-4
(2) Perform “moire alleviation” function. P.3-22
Feeding unevenness occurs.
(1) Set the belt encoder setting to “OFF” and [Belt Joint Adj.] to valid.
P.3-8
(2) Make the softness function valid. P.3-10