5-14
Error messages
Cause
Solution
An error occurred in the
communication between the I/
F board and the main PCB.
Turn OFF the power to the machine and turn it ON
again after a while.
If the same error message appears again, contact
our service office or the distributor in your region.
The I/F board does not exist.
A time out error occurred in the
communication with the host
computer.
Securely connect the interface cable in position.
Check whether an error has not occurred in the
host computer.
An error occurred in the I/F
board initialization.
Turn OFF the power to the machine and turn it ON
again after a while.
If the same error message appears again, contact
our service office or the distributor in your region.
An error occurred in
communication between the
host computer and this
machine due to the USB2.0
connection. (Full-Speed mode
connection)
Check that the host PC supports the USB2.0
interface.
(Communication can be resumed without changing
any setting. However, it is recommended to use
the connection in Highspeed mode.)
An error occurred in
communication between the
host computer and this
machine due to the USB2.0
connection.
Check that the cable is securely connected. Also,
check to see if any error has occurred in the host
computer.
The function setting has been
changed or an unavailable
function has been commanded
while an unfinished printing job
remains in the queue.
Finish printing all the data that has been received
by the machine or clear the remaining data, and
then try again.
An excessive load was
applied to the Y motor.
Turn OFF the power to the machine and turn it ON
again after a while.
If the same error message appears again, contact
our service office or the distributor in your region.
An error due to an excessive
current
of the Y motor was detected.
Scanning was tried on outside
the area available for
scanning.
An error occurred in the
capping control.
An error occurred in the wiper
control.
An error occurred in the station
control.
E R R O R 2 0
I / F B O A R D
E R R O R 2 1
I / F N ON E
E R R O R 2 3
H O S T
I / F
E R R O R 2 4
I / F
I N I T I A L
E R R O R 2 5
F U L L - S P E E D
E R R O R 2 5
P A C K E T S I Z E O V E R
E R R O R 2 5
U S B P R O T OC O L
E R R O R 2 5
U S B E N V I R ONM E N T
E R R O R 2 5
U S B D A T A
E R R O R 3 4
D A T A R E MA I N
E R R O R 4 1
MO T O R Y
E R R O R 4 3
Y O V E R C U R R E N T
E R R O R 4 4
S C A N R A N G E
E R R O R 4 5
C A P P I N G
E R R O R 4 6
W I P I N G
E R R O R 4 7
S T A T I ON
Summary of Contents for TEXTILE JET TX1800B
