manualshive.com logo in svg

MIMAKI TEXTILE JET TX1800B, Operation Manual

Share
Download
MIMAKI TEXTILE JET TX1800B Operation Manual Download Page 139

4-21

1

2

3

4

Maintenance

6

Cleaning the Ink Head and the Area around It

Because the ink head employs a very precise mechanism, due care needs to be taken when it is cleaned.
Using a clean stick, etc., rub off gelatinous ink or dust that may stick to the lower part of the slider and the area
around the ink head. In doing so, never rub the nozzles of the head.

1

Select [Carriage] of the maintenance menu.

(1)

Press the 

 key.

(2)

Press 

 to select [MAINTENANCE] and press the 

 key.

(3)

Press 

 to select [Carriage] and press the 

 key.

(4)

Press the 

 key.

• Carriage will move to the left end of this device.

2

Remove the maintenance cover L.

3

Wipe off ink sticking to around the head with a clean stick.

4

After cleaning is completed, close the maintenance cover L.

5

Press the 

 key.

• After its initial operation, the machine returns to the media

selection. (

P.2-34)

Tools needed for 

cleaning

• Cleaning solution bottle kit A29 (PN: SPC-0137) [sold separately]
• Clean stick (SPC-0527)

• Gloves

• If ink settles on the skin or fabrics, immediately wash it off with detergent or water. In the event that ink 

gets in eyes, immediately rinse it off with water and consult a medical doctor.

• Never rub the nozzles.

P l e a s e Wa i t

* * * * * * * * * - - - - - - - - - - -

Summary of Contents for TEXTILE JET TX1800B































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands