MIMAKI TEXTILE JET TX1800B, Operation Manual

Page: 77 / 222

Test Printing
2-37
1
2
Basic Operation
s
4
5
6
Performing Head Cleaning
Head cleaning can be performed in three ways. Select one according to the result of test printing.
NORMAL : When any line is missing
SOFT : When only head wiping is needed (when lines are bent)
HARD : When poor image quality cannot be improved even by NORMAL or SOFT cleaning
1
Press the key in LOCAL.
2
Press to select the head to clean by block.
• The heads are divided into two blocks of [1234] and [5678].
3
Press to select the execution of the cleaning.
• When the cleaning is not made, the display shows [----].
4
Press the key.
5
Press to select a type of cleaning.
6
Press the key twice.
• The remaining cleaning time is indicated in the lower part of the
display.
• When cleaning has ended, the screen returns to LOCAL.
7
Perform test printing again to check the result.
• Repeat the cleaning and test printing until the result becomes normal.
When image quality is not improved even though head cleaning is repeated:
• Clean the wiper and ink cap. ( P.4-4, P.4-5)
• Wash the nozzle head. ( P.4-8)
• See “If nozzle clogging is not solved (ink filling)” to improve poor image quality. ( P.4-24)
C l e a n i n g
C o l o r
: 1 2 3 4 5 6 7 8
C l e a n i n g
C o l o r
: 1 2 3 4 5 6 7 8
C l e a n i n g
C o l o r
: 1 2 3 4 - - - -
C l e a n i n g
T y p e : N o r ma l
C l e a n i n g
T y p e : H a r d
* * C l e a n i n g * *
0 0 : 0 0 : 0 0