MIMAKI TEXTILE JET TX1800B, Operation Manual

Page: 18 / 222

1-4
Rear
Name Function
(1)
Feeding unit Unit to feed the roll media before printing.
(2)
Centering motor Prevents meandering of the roll media with weaving.
(3)
Roll holder Supports the paper core of two to three inches.
(4)
Cenntering sensor /
Media end sensor
Detects weaving of the media and changes its operation to the centering
operation.
Detects the media end with the sensor.
(5)
Tension bar
Places the proper tension on the fabric and controls the operation of the
feeding unit.
(6)
Pressure Roller Places the pressure and attaches the media on the feeding belt.
(7)
Smoothing wrinkle roller Smooths wrinkle of the fabric.
(8)
Fabric winding roller
Sucks remaining water drops on the feeding belt. It is required to change the
wound fabric periodically.
(9)
Operation panel (Rear)
You can perform manual/automatic operation of the feeding unit, the centering
unit, the pressure roller, etc. At the media setting, you can operate without
moving to the operation panel (front).
(1)
(2)
(9)
(3)
(6)
(4)
(8)
(7)
(5)