MIMAKI TEXTILE JET TX1800B, Operation Manual

Page: 174 / 222

5-8
Releasing method of warning when “!Media End” is displayed
There are two methods to detect the media end:
(1) Detection of media end by media end sensor
(2) Detection of media end by change of tension bar

When media end was detected by media end sensor
When media end was detected by the media end sensor, [MEDIA
END] on the operation touch panel lights in red and the buzzer
sounds to inform you of the error.
When the warning of media end is
displayed
1
Press on the Tx400 operation panel.
2
Press [MEDIA END] on the operation touch
panel of the media feeding system to change it
to [MEDIA END OFF].
• The media end warning was released.
3
Press the key on the operation panel to
display the local screen.
4
Select restart or termination of printing.
• When you restart printing, press the key.
• When you terminate printing, press the key to
delete the printing data.
• If you print with the media feeding system is [MEDIA END OFF] status, media end cannot be
detected. Be sure to print while checking the remaining amount of the media etc. If you print without
media, printing may be performed on the belt.
! Me d i a E n d
P r e s s < FUNC > K e y
! Me d i a E n d
C h e c k : e n t
< LOCA L . 1 > [ # 0 1 ]
: 1 8 0 0
< REMOT E . 1 > [ # 0 1 ]
A L L / 8 PU / W3 2 1 / 0 . 0m
* * DA T A C L EAR * *