Power Network Application Trainer Introduction
MI 3298
15
1.8 Description of MI 3298 HV Training Module set
’s
1.8.1
Markings on the module set’s
The symbol
on the HV training module means »Read the Instruction manual with
special care for safe operation«. The symbol requires an action!
If the HV training module is used in a manner not specified in this Instruction
manual, the protection provided by HV training module could be impaired!
Read this Instruction manual carefully, otherwise the use of the HV training
module may be dangerous for the operator, the test equipment itself or for the
tested object!
Do not use the HV training module if any damage is noticed!
Consider all generally known precautions in order to avoid risk of electric shock
while dealing with hazardous voltages!
Service intervention is only allowed to be carried out by competent authorized
personnel!
Do not use the HV training module in a wet environment, around explosive gas,
vapour or dust.
For the training purposes and for your safety, use Metrel instruments described in
this manual
The symbol
on the HV training module means “Hazardous voltage may be
present at the test terminals!”.
Do not touch any conductive parts of HV training module under test during the
test, risk of electric shock!
Mark on your equipment certifies that it meets European Union requirements for
EMC, LVD, and ROHS regulations.
This equipment should be recycled as electronic waste.
Summary of Contents for MI 3298
