Mercedes-Benz 2016 Command, Operating Instructions Manual

Page: 149 / 222

current Internet connection. Therefore, you
cannot establish an Internet connection dur-
ing a service call.
Canada: a mobile phone must be connected
via Bluetooth
®
(
Y
page 112) or USB
(
Y
page 198) with COMAND. Furthermore,
you need a valid mobile service contract with
a data option, which is used to calculate the
associated connection costs.
Conditions for a Bluetooth
®
connection
R
The mobile phone supports at least one of
the Bluetooth ® profiles DUN (Dial-Up
Networking) or PAN (Personal Area
Network).
The Bluetooth
®
profiles DUN and PAN ena-
ble the Internet connection of the mobile
phone to be made available to the system.
Conditions for a USB connection
R
The mobile phone supports at least one of
the USB classes:
-
RNDIS (Remote Network Driver Inter-
face Specification)
-
CDC/NCM (Network Control Model)
-
CDC/ECM (Ethernet Control Model)
-
CDC/ACM (Access Control Model)
The USB classes enable the mobile phone
Internet connection to be made available to
the system.
The terms of use are shown when the system
is used for the first time and then once a year
thereafter. Only read and accept the terms of
use when the vehicle is stationary.
The driver is not permitted to call up websites
while driving and use of the Mercedes-Benz
Apps is restricted.
i The availability of individual Mercedes-
Benz Apps may vary depending on the
country.
Setting up an Internet connection
(Canada)
Procedure and general information
If you are using Internet access for the first
time, you must enable the connected mobile
phone for Internet access (
Y
page 147). If the
connected mobile phone supports the Blue-
tooth
®
PAN profile or the USB classes RNDIS,
CDC/NCM or CDC/ECM, you do not need to
make additional settings. The Internet con-
nection is established. If the connected
mobile phone does not support the named
Bluetooth
®
profile or the named USB classes,
predefined (
Y
page 148) or manual access
data (
Y
page 148) must be set.
While initializing the mobile phone for the
Internet connection, access data which is
already on the mobile phone may be over-
written. You should therefore check the set-
tings on the mobile phone (see the manufac-
turer's operating instructions).
Enabling the mobile phone for Inter-
net access
X
To call up Internet functions (
Y
page 151).
X
To switch to the menu bar: slide 6 the
controller.
X
To select Settings : turn and press the
controller.
X
To select Configure Internet Set‐
tings : turn and press the controller.
A message is displayed telling you that the
settings for the Internet functions depend
on your mobile phone network provider and
your mobile phone.
If a mobile phone has already been ena-
bled, the device list is displayed.
X
To select Start Search : turn and press
the controller.
Mobile phones are displayed that:
Setting up an Internet connection (Canada)
147
Onl
ine
and
In
te
rne
tfuncti
ons
Z