Mercedes-Benz 2016 Command Operating Instructions Manual Download

Page: 43 / 222

Setting the time and date format

Use this function to set the time and date for-

mat for all displays in the vehicle.

Press the

button.

Press

Vehicle

in the main function bar.

The vehicle menu is displayed.

To select

Time

: slide

, turn and press

the controller to confirm.

A menu appears.

To select

Format

: turn and press the con-

troller.

To select the desired date format: turn and

press the controller.

The

dot indicates the current setting.

To select the desired time format: turn and

press the controller.

The

dot indicates the current setting.

Abbreviation

Meaning

YYYY/MM/DD

Year/Month/Day
date format, year (all

four digits)

YY/MM/DD

Year/Month/Day
date format, year

(two digits)

MM/DD/YYYY

Month/Day/Year
date format, year (all

four digits)

DD/MM/YYYY

Day/Month/Year
date format, year (all

four digits)

HH:MM (24 hrs)

Hours : Minutes
(24 hour time for-

mat)

HH:MM (AM/PM)

Hours : Minutes
(AM/PM time for-

mat)

Text reader settings

Press the

button.

Press

Vehicle

in the main function bar.

The vehicle menu is displayed.

To select

System Settings

: slide

turn and press the controller to confirm.

A menu appears.

To select

Text Reader Speed

: turn and

press the controller.

A list appears.

Select

Fast

Medium

Slow

The

dot indicates the current setting.

Voice Control System settings

Opening/closing the help window

If the set system language is not suppor-

ted by the Voice Control System, English

will be selected.

The help window also shows you information

on audible instructions:

during individualization

during subsequent operation of the Voice

Control System

Press the

button.

Press

Vehicle

in the main function bar.

The vehicle menu is displayed.

To select

System Settings

: slide

turn and press the controller to confirm.

A menu appears.

To select

Voice Control

: turn and press

the controller.

Select

Help Window

You have switched the help window on

or off

More information on the Voice Control Sys-

tem is available in the separate operating

instructions.

Voice Control System settings

System

settings

Summary of Contents for 2016 Command































































































































































































































Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands

Mercedes-Benz 2016 Command, Operating Instructions Manual

Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands