Mercedes-Benz 2016 Command Operating Instructions Manual Download

Page: 138 / 222

With some mobile phones, some settings still

have to be made after connecting to

COMAND (see the manufacturer's operating

instructions). The messages are displayed the

next time you connect to COMAND.
An e-mail account must be set up on the

mobile phone for the e-mail function (see the

manufacturer’s operating instructions).
To read and write e-mails in COMAND, the e-

mail account first needs to be configured

(

page 137).

Some mobile phones with the MAP Blue-

tooth

profile:

only show new text messages.

do not support the deleting or editing of

text messages.

do not support the drafts folder for text

messages.

do not support the sending of text mes-

sages.

do not support the e-mail function.

do not send messages in a locked status.

Not all mobile phones available on the market

are equally suitable. You can obtain further

information about settings and supported

functions of Bluetooth

-capable mobile

phones on the Internet at

www.mercedes-benz-mobile.com.
Or call the Mercedes-Benz Customer Assis-

tance Center at 1-800-FOR-MERCedes

(1-800-367-6372) (for the USA) or Customer

Relations at 1-800-387-0100 (for Canada).

Settings

Calling up the settings menu for mes-

sages

To call up the telephone menu: press the

button.

To switch to the menu bar: slide

the

controller.

To select

: turn and press the controller.

The message menu is displayed.

To switch to the menu bar: slide

the

controller.

To select

Settings

: turn and press the

controller.

The text message settings and the available

e-mail accounts of the connected mobile

phone will be displayed.

Configuring the text messages dis-

played

Call up the settings menu for messages

(

page 136).

To highlight

Text Message

: turn the con-

troller.

To select

: slide

the controller.

A menu with the following options is shown:

All Messages

All the messages are displayed.

New Messages

Only the messages that are new on the

mobile phone are displayed. You can also

display the last 100 text messages using

136

Messages (text messages and e-mails)

pho

Summary of Contents for 2016 Command































































































































































































































Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands

Mercedes-Benz 2016 Command, Operating Instructions Manual

Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands