Mercedes-Benz 2016 Command Operating Instructions Manual Download

Page: 30 / 222

Deleting characters

Prerequisite: an input line for text, numbers or

characters has been selected.

Use your finger to touch the touch-sensi-

tive surface and swipe to the left.

The character last entered is deleted.

Switching input line

Press the touchpad.

A symbol is shown.

To select

: swipe your finger to the left

or right and press.

To select the desired input line, swipe up or

down and press.

The selected input line is active and char-

acter entry can be continued.

Moving the cursor within the input line

Press the touchpad.

A symbol is shown.

To select

: swipe your finger to the left

or right and press.

To move the cursor, swipe to the left or

right.

Changing the input language for hand-

writing recognition

Prerequisite: an input line for text, numbers or

characters has been selected.

Press the touchpad.

A symbol is shown.

To select

: swipe your finger to the left

or right and press.

The list of available input languages

appears.

To select a language: swipe up or down and

press.
To select a language: swipe up or down and

press.

The input language for handwriting recog-

nition has been changed.

Searching in lists

The phone book search is used as an exam-

ple.
You determine the first letter of the contact

you are looking for with the first character you

enter.

Draw the letter on the touchpad surface.

The first contact with the selected first

character is highlighted in the phone book.
Further information on handwriting recog-

nition on the touchpad (

page 27).

Draw additional letters on the touchpad

surface one after another.

To complete the search and return to

the phone book: press the touchpad.

Switching between the controller and

the touchpad as input device

Prerequisite: an input line for text, numbers or

characters has been selected.

To switch from character entry using

the controller to handwriting recogni-

tion on the touchpad: use one finger to

press the touchpad.

Handwriting recognition on the touchpad is

active.

Touchpad

Overview

eration

Summary of Contents for 2016 Command































































































































































































































Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands

Mercedes-Benz 2016 Command, Operating Instructions Manual

Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands