Mercedes-Benz 2016 Command, Operating Instructions Manual

Page: 88 / 222

Possible lane ; : you will only be able to com-
plete the next change of direction in this lane.
Recommended lane
= : in this lane you will
be able to complete the next change of direc-
tion and the one after that.
COMAND shows the lane recommendations
for the next two changes of direction. Lane
recommendations are also shown in the mul-
tifunction display of the instrument cluster
(see the vehicle Operator's Manual).
Approaching new lanes
:
Approaching new lane
During the change of direction, new lanes
may be added. These will be shown in the dis-
play of lane recommendations with a lower
boundary line.
Highway information
Display mode
Requirement: the Highway Information
map content must be enabled (
Y
page 98).
While driving on the highway, gas stations,
rest stops, rest areas and highway exits are
displayed along with their immediate distan-
ces from the current vehicle position.
Calling up the selection mode
X
When highway information is displayed,
slide 9 the controller.
The marker is on the highway information.
The associated position is highlighted on
the map.
X
To select the desired rest stop/freeway
exit: turn and press the controller.
The available POIs are displayed.
Starting route guidance to a POI
X
To select a POI: turn the controller and
press to confirm.
The POI details are displayed.
You can perform the following functions:
R
store in the address book (
Y
page 94)
R
view on the map (
Y
page 99)
R
call if a phone is connected and a phone
number is available (
Y
page 118).
R
select for route guidance and a route to it
calculated (
Y
page 69).
86
Route guidance
Navigation