Mercedes-Benz 2016 Command Operating Instructions Manual Download

Page: 82 / 222

Personal POIs are filed in categories:

Not Classified

Standard entry for personal POIs

Mercedes-Benz Apps

Personal POIs (destinations, routes) that

you have imported via the online functions

(

page 156)

Categories which you have created your-

self, e.g. on your PC

Personal routes are not categorized.

Settings for personal POIs

Displaying on the map

Requirements: an SD memory card with per-

sonal POIs is inserted (

page 182).

The SD memory card is formatted using the

FAT file system (e.g. FAT32).
All personal POIs of the selected category are

displayed on the map with a corresponding

symbol.
If the "Alert when approaching" function is

activated (

page 80) the symbols are dis-

played up to a map scale of 2 km.

To switch to navigation mode: press the

button.

To show the menu: slide

the control-

ler.

To select

Options

, turn and press the con-

troller.

Select

Personal POIs

Select

Display on the Map

The menu displays the categories available

on the SD memory card.

To select a category: turn the controller

and press to confirm.

All personal POIs in the selected category

are displayed

or not displayed

depending on the previous status.

Alert when approaching

Requirements: an SD memory card with per-

sonal POIs is inserted (

page 182).

The SD memory card is formatted using the

FAT file system (e.g. FAT32).
If the vehicle is approaching a personal POI,

this is highlighted on the map and/or an audi-

ble signal sounds.
For this purpose both the corresponding func-

tion

Approaching POI Cue

, and the cate-

gory containing the personal POI must be

activated.

To switch to navigation mode: press the

button.

To show the menu: slide

the control-

ler.

To select

Options

, turn and press the con-

troller.

Select

Personal POIs

Select

Approaching POI Cue

The menu displays the categories available

on the SD memory card.

Personal POIs and routes

Navigation

Summary of Contents for 2016 Command































































































































































































































Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands

Mercedes-Benz 2016 Command, Operating Instructions Manual

Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands