Mercedes-Benz 2016 Command Operating Instructions Manual Download

Page: 23 / 222

Navigation system

Navigation via the hard drive

Destination entry using keyword search

Realistic 3D map with textured city mod-

els

Personal POIs and routes using SD mem-

ory card

Navigation functions, e.g. Drive Informa-

tion

Dynamic route guidance with traffic

reports via SIRIUS satellite radio

Communication

Messaging functions (text messages,

email)

Address book

Internet browser

Mercedes-Benz Apps with Google Local

Search™, destination/route download,

Facebook, Google Street View™, stock

prices, news and much more

Mercedes-Benz Mobile Website

WiFi interface for the connection of a

smartphone to COMAND

WiFi hotspot functionality to connect a

tablet PC or laptop in order to enable

access to the Internet using the custom-

er's mobile phone

SIRIUS Weather

Weather data as an information chart

(current forecast, 5-day preview,

detailed information)

Weather data on the weather map, e.g.

rain radar data, storm characteristics

and the track of tropical cyclones (hurri-

canes, typhoons)

Vehicle functions

Vehicle settings, such as ambient light-

ing, belt adjustment and tow-away alarm

360° camera

Rear view camera

Climate control functions, such as cli-

mate mode, perfume atomizer and aux-

iliary heating

DYNAMIC SELECT (individual drive pro-

gram)

Favorites button
Fast access to favorites functions using the

favorites button on the controller or on the

touchpad

Display

General notes

Avoid any direct contact with the display

surface. Pressure on the display surface

may result in impairments to the display,

which could be irreversible.

Wearing polarized sunglasses may impair

your ability to read the display.
The display has an automatic temperature-

controlled switch-off feature. The brightness

is automatically reduced if the temperature is

too high. The display may then temporarily

switch off completely.

Overview

Status bar with displays

;

Cover view (if available)

Overview

ope

rati

Summary of Contents for 2016 Command































































































































































































































Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands

Mercedes-Benz 2016 Command, Operating Instructions Manual

Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands