Mercedes-Benz 2016 Command Operating Instructions Manual Download

Page: 198 / 222

Switching to Bluetooth

audio mode

Basic display

Audio transmission status (depending on

the Bluetooth

audio device, also title

name and artist)

;

Data medium position in the media list

Sound settings

Device list

To stop

or start

playback

Name of the connected Bluetooth

audio

device (example)

Options menu

Some mobile phones only support two Blue-

tooth

profiles at the same time (e.g. Hands-

Free Profile for Bluetooth

telephony and

Bluetooth

audio profile for audio streaming).

If you activate Bluetooth

audio mode and

there is already an active Internet connection,

this can cause the connection to be termina-

ted.

Switching to Bluetooth

Audio

To call up the media menu: press the

button.

The last media source you have set is dis-

played.

To show the main function bar: slide

the controller.

To select

Media

: turn and press the con-

troller.

To select

Bluetooth Audio

: turn and

press the controller.

COMAND activates the Bluetooth

audio

device. The basic display then appears.

Playback starts.

If the Bluetooth

audio device connected

supports metadata and corresponding data

is available, then the artist, track and album

name can be displayed.

Starting/stopping playback

To select Start playback

: turn and

press the controller.

Playback starts.

is selected.

To stop playback: select

A message appears.

is selected.

To continue playback: select

A message appears.

is selected.

Starting playback if the Bluetooth

audio device has been stopped

During the search for mobile phones

(

page 113), the connection with the Blue-

tooth

audio device is terminated. In the

Bluetooth

audio basic display (

page 196)

you will see the

No Bluetooth Audio

Device Connected

message and the

Con‐

nect Last Used Player

menu item cannot

be selected.
When the search is finished, the Bluetooth

audio device can be reconnected.

196

Bluetooth

audio mode

Media

Summary of Contents for 2016 Command































































































































































































































Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands

Mercedes-Benz 2016 Command, Operating Instructions Manual

Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands