Mercedes-Benz 2016 Command Operating Instructions Manual Download

Page: 218 / 222

Changing the scale

Turn the controller.

The scale bar appears.

Turn until the desired scale is set.

Showing/hiding the menu in the

weather map

To show: press the controller.

To hide: slide

the controller.

Selecting a weather station in the map

Move the weather map and crosshair to the

desired position (

page 215).

To show the menu: press the controller.

To select

Weather Table

: press the con-

troller.

COMAND receives the weather data for the

selected position from the nearest weather

station and displays it automatically as a

daily forecast.

Switching layers on the map on/off

You can switch on different layers, for exam-

ple to display the rain radar, weather fronts

and the course of tropical storms on the map.

Display the menu on the weather map

(

page 216).

To select

View

: turn and press the control-

ler.

Select a layer.

Switch the display on

or off

Explanation of the layers on the

weather map

Menu item

Radar Map

Displays the rain radar as a colored area in

all map scales. For an explanation of the

colors, see the legend (

page 219).

Menu item

Storm Characteristics

Displays the characteristics of a storm in all

map scales:

tornadic storm:
storm cell with strong winds (super cell),

from which a tornado can develop. Tor-

nadoes are also known as twisters.

cyclone:
storm cells from which a tornadic storm

can develop

hailstorm

the likelihood of a hailstorm

Storm watch areas
Shows areas for which storm advisories

have been issued (red areas). It is shown in

map scales 50 mi (50 km), 200 mi (200 km)

and 500 mi (500 km).

Menu item

Atmospheric Pressure

Shows the position of high and low-pres-

sure areas (H, L), weather fronts and iso-

bars It is shown in map scales 200 mi

(200 km) and 500 mi (500 km).

Menu item

Tropical Storm Tracking

Shows the direction and speed of propaga-

tion (track) of a tropical storm in all map

scales with information on times and inten-

sity.

Menu item

Winds

Shows the wind direction and wind speed in

map scale of 5 mi (5 km).

216

Weather forecasts

SIR

IUS

Weat

her

Summary of Contents for 2016 Command































































































































































































































Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands

Mercedes-Benz 2016 Command, Operating Instructions Manual

Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands