Mercedes-Benz 2016 Command Operating Instructions Manual Download

Page: 37 / 222

Displaying and selecting favorites

To display the favorites overview: press

the favorites button on the controller.

To call up favorites: turn and press the

controller.

Adding favorites

Adding predefined favorites

Press the favorites button on the controller.

To show the menu bar, slide

the con-

troller.

To select

Reassign

: turn and press the

controller.

The categories for favorites are displayed.

Navigation

Entertainment

Phone

Vehicle

Climate Control

To select a category: turn the controller

and press to confirm.

The available favorites are displayed.

To select a favorite: turn and press the

controller.

Adding a favorite at the desired posi-

tion: turn and press the controller.

If a favorite is stored over another favorite,

the favorite underneath is deleted.

Adding your own favorites

You can store phone numbers from the phone

book, radio stations or destinations as favor-

ites.
A phone number from the phone book is used

as an example.

Call up the phone book (

page 121).

Search for the contact and display the

phone number: (

page 122).

To add a telephone number as a favorite

at the desired position: press and hold

the favorites button on the controller until

the favorites are displayed.

Turn and press the controller.

If a favorite is stored over another favorite,

the favorite underneath is deleted.

Renaming favorites

Press the favorites button on the controller.

The favorites are displayed.

To select the favorite to be renamed:

turn the controller.

To show the menu bar: slide

the con-

troller.

To select

Rename

: turn and press the con-

troller.

Enter characters using the controller

(

page 31) or the touchpad (

page 27).

To finish the entry: select

The favorite has been renamed.

Moving favorites

Press the favorites button on the controller.

The favorites are displayed.

To select the favorite to be moved: turn

the controller.

To show the menu bar: slide

the con-

troller.

Favorites

Overview

eration

Summary of Contents for 2016 Command































































































































































































































Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands

Mercedes-Benz 2016 Command, Operating Instructions Manual

Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands