Mercedes-Benz 2016 Command Operating Instructions Manual Download

Page: 204 / 222

Function restrictions

Depending on the DVD, certain functions or

actions may not function at all. The symbol

appears in the display.

Switching on video DVD mode

Insert and eject a disc from the single drive

(

page 181)

Further options for switching on:

Using the main function bar (

page 178)

Using the device list (

page 179)

Using the

button (

page 178)

DVD basic display

Main function bar

;

Main display field

Media menu bar

The DVD basic display appears once the DVD

has been inserted.

DVD full-screen mode

Once the DVD has been inserted, the disc is

played. The video will first appear in the over-

view display.

To set full-screen mode: slide

the

controller.

The main function bar and menu bar are

hidden. A full-screen symbol will be shown.

Press the controller.

The full-screen mode appears.

To show the DVD basic display in full-

screen mode: slide

the controller.

The video menu appears.

Press the controller.

The basic display appears.

Menu options

To select options: in full-screen mode,

slide

the controller.

The video menu appears.

Press the controller.

The DVD basic display appears.

To select

Options

in the menu bar: turn

and press the controller.

The

Options

menu appears.

Skip to time

To select

Skip to Time

: turn and press the

controller.

A menu appears.

To set the time: turn the controller.
or
Set the desired time using the number key-

pad.

To hide the menu: press the

button.

DVD functions

To select

DVD Functions

: turn and press

the controller.

A menu appears (

page 204).

Video settings

Dynamic image enhancement

The

Dynamic Image Enhancement

function

automatically matches

Bright.

Con‐

trast

and

Color

to the film being played.

202

Video DVD mode

Media

Summary of Contents for 2016 Command































































































































































































































Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands

Mercedes-Benz 2016 Command, Operating Instructions Manual

Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands