Mercedes-Benz 2016 Command Operating Instructions Manual Download

Page: 22 / 222

Overview

Components

COMAND display

;

DVD changer or single DVD drive

;

Single DVD drive

Touchpad (for COMAND with touchpad)

Controller

COMAND consists of:

the display
The COMAND display has 960 x 540 pixels.

the single DVD drive

the buttons

the controller

the touchpad (for COMAND with touchpad)

ports in the center console (2 x USB, SD card slot)
An iPod

is connected via USB cable.

For COMAND with touchpad: the controller and touchpad provide two options for entering

characters and selecting functions.

Functions

HD FM radio and HD AM radio/satellite

radio

Media

Media support: audio CD, MP3 CD, DVD

video, two connection options for USB or

Media Interface (e.g. iPod

), SD card,

Bluetooth

audio, 10.8 GB Media Regis-

ter on the hard drive

Music search using all media

Sound system
You can select from two sound systems:

Standard sound system

Burmester

surround sound system

Overview

Over

view

and

operation

Summary of Contents for 2016 Command































































































































































































































Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands

Mercedes-Benz 2016 Command, Operating Instructions Manual

Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands