Mercedes-Benz 2016 Command Operating Instructions Manual Download

Page: 112 / 222

Your COMAND equipment

These operating instructions describe all

the standard and optional equipment of

your COMAND system, as available at the

time of going to print. Country-specific dif-

ferences are possible. Bear in mind that

your vehicle may not feature all functions

described here. This also applies to safety-

relevant systems and functions.

Read the information on qualified special-

ist workshops in the vehicle Operator's

Manual.

Important safety notes

WARNING

If you operate mobile communication equip-

ment while driving, you will be distracted from

traffic conditions. You could also lose control

of the vehicle. There is a risk of an accident.
Only operate this equipment when the vehicle

is stationary.

If you make a call on your mobile phone while

driving, always use hands-free mode. Only

use the mobile phone when road, weather

and traffic conditions permit. Some jurisdic-

tions prohibit the driver from using a mobile

phone while driving a vehicle.
Bear in mind that at a speed of 30 mph

(approximately 50 km/h), the vehicle covers

a distance of 44 feet (approximately 14 m)

per second.
Excessive levels of electromagnetic radiation

may cause damage to your health and the

health of others.
There is scientific discussion surrounding the

possible health risks posed by electromag-

netic fields. You can reduce this risk by using

an exterior antenna.
Therefore, connect your mobile communica-

tions equipment to the vehicle's exterior

antenna wherever possible.

General notes

Telephony

A Bluetooth

interface is available for teleph-

ony.
If your mobile phone supports the Bluetooth

profile PBAP (Phone Book Access Profile), the

contacts are automatically displayed in

COMAND.
You can use the message function if your

mobile phone supports the MAP Bluetooth

profile (Message Access Profile).
With a suitable mobile phone, you can use the

hands-free system and receive vCards via the

Bluetooth

interface.

You can obtain more information about suit-

able mobile phones on the Internet at

www.mercedes-benz-mobile.com.
Or call the Mercedes-Benz Customer Assis-

tance center at

1-800-FOR-MERCedes(1-800-367-6372) for

the USA or at 1-800-387-0100 for Canada.

HD Voice

COMAND supports telephone calls in HD

Voice

. The voice quality can be improved

with this procedure.
Requirements for HD Voice

Your mobile phone and mobile phone net-

work provider support HD Voice

The mobile phone and mobile phone net-

work provider of the person you are calling

support HD Voice

Depending on the quality of the connection,

the voice quality may fluctuate.

110

General notes

Tel

ephon

Summary of Contents for 2016 Command































































































































































































































Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands

Mercedes-Benz 2016 Command, Operating Instructions Manual

Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands