Mercedes-Benz 2016 Command Operating Instructions Manual Download

Page: 38 / 222

To select

Move

: turn and press the control-

ler.

To store the favorite in the desired

order: turn and press the controller.

If a favorite is stored over another favorite,

the favorite underneath is deleted.

Deleting favorites

Press the favorites button on the controller.

The favorites are displayed.

To select a favorite to be deleted: turn

the controller.

To show the menu bar: slide

the con-

troller.

To select

Delete

: turn and press the con-

troller.

To select

Yes

: turn and press the controller.

The favorite is deleted.

If you select

, the process will be can-

celed.

Favorites

Overview

and

operation

Summary of Contents for 2016 Command































































































































































































































Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands

Mercedes-Benz 2016 Command, Operating Instructions Manual

Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands