Mercedes-Benz 2016 Command Operating Instructions Manual Download

Page: 133 / 222

Source

Prerequisites

Memory card The SD memory card is

inserted. It contains

importable contact details.

USB device

The USB device is inserted

into the USB port. It con-

tains importable contact

details.

Bluetooth

connection

If the sending of vCards is

supported via Bluetooth

vCards can be received on

mobile phones or net-

books, for example.
Bluetooth

must be activa-

ted in COMAND and on the

respective device (see the

manufacturer's operating

instructions).

If automatic calling up of the contacts is

deactivated (

page 130), the

Import

from Phone

option is available.

Importing from the memory card or USB

device

Contacts imported from the memory card or

from a USB device are identified by the

symbol.
The following conditions must be fulfilled in

order to import vCards:

vCards (vcf files) may be located in the main

directory or in folders. COMAND allows you

to select the relevant folders directly.

vCards must have the file extension "vcf".

COMAND supports vCards in versions 2.1

and 3.0.

To switch to the menu bar in the telephone

menu or the address book: slide

the

controller.

To select

Options

: turn and press the con-

troller.

To select

Download Contacts

: turn and

press the controller.

To select

From Memory Card

From USB

device

: turn and press the controller.

Receiving vCards via Bluetooth

COMAND

To switch to the menu bar in the telephone

menu or the address book: slide

the

controller.

To select

Options

: turn and press the con-

troller.

To select

Download Contacts

: turn and

press the controller.

To select

From Bluetooth Device

: turn

and press the controller.

If COMAND is connected to a mobile

phone, the connection is terminated.

vCards can now be received by a device

(PC, mobile phone) via Bluetooth

External device

Start the data transfer (see the manufac-

turer's operating instructions).
The number of vCards received is displayed

in COMAND.

COMAND

To cancel the transfer: press the controller.

If a mobile phone was connected, the con-

nection to the mobile phone is established

again.

Received vCards are identified by the

symbol in the address book.

Address book

131

Telephone

Summary of Contents for 2016 Command































































































































































































































Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands

Mercedes-Benz 2016 Command, Operating Instructions Manual

Search results

Summary of Contents for 2016 Command

Reviews:

Related manuals for 2016 Command

Brands by name

Popular brands