MEATEST
M133C Electric Power/Energy Calibrator
Operation manual
36
Energy modes (Mode softkey)
Output energy can be generated in different energy modes:
AC energy
Mode
Name
Description
Basic
Eac Basic AC energy basic mode. Phase shift between channels output
voltages are fixed (120º and 240º). All parameters are the same for
all channels. Number of active channels can be defined in Main
menu (1, 2 or 3).
High I
Eac High I In this mode current outputs of all channels are connected in
parallel (using the M133C-01 High Current Adapter). Current
range is increased three times.
DC energy
Mode
Name
Description
Basic
Edc Basic DC energy basic mode. Only first channel 1 is controlled in this
mode.
High I
Edc High I In this mode current outputs of all channels are connected in
parallel (using the M133C-01 High Current Adapter). Current
range is increased three times.
Use „Mode“ softkey to open the mode selection menu. Select the required mode using cursor
buttons or the rotary knob. Confirm the selection by pressing the rotary knob or the “Select”
softkey. Output terminals are disconnected if the new mode is selected.
