M133C Electric Power/Energy Calibrator
MEATEST
43
Operation manual
6
Calibrator setup menu (Main menu)
The calibrator allows many other, less frequently used parameters to be set. Setup menu is used to
set these parameters. Setup menu is opened by pressing MENU button. If output terminals are
connected, they will be disconnected and the following display appears:
Use
or
cursor button or the rotary knob to browse the menu options. Press „Select“ softkey or
press in on the rotary knob to select highlighted item. Press „Exit“ softkey to leave the selected
menu level.
New settings are retained when the calibrator is switched off.
The Main menu contains items:
*
General – general instruments settings (display, keyboard, time, date)
*
Interface – parameters of instruments remote control
*
Calibrator – parameters of signal generation
*
Meter – parameters of multimeter
*
Calibration – instruments calibration data
6.1
General Menu
Submenu contains basic parameters of display and keyboard.
1.
Volume
This parameter sets the beeper volume. Cursor buttons, rotary knob or numeric keyboard allow to
set the value in the range of 0 to 15.
Press the Write
softkey to set the beeper volume and return to the
General menu.
2.
Brightness
This parameter sets the display brightness. Cursor buttons, rotary knob or numeric keyboard allow
to set the value in the range of 0 to 7. Press the Write softkey to set the display’s brightness and
return to the General menu.
