Meatest M133C, Operation Manual

Page: 74 / 148

MEATEST
M133C Electric Power/Energy Calibrator
Operation manual
74
:MVOLtage(?) <CPD> { OFF | ON | 0 | 1 }
:REFerence
:UNIT(?) <CPD> { W | VA | VAR }
:PULLup(?) <CPD> { 0 | 1 }
:CONStant(?) <DNPD>
:MHARmonics
:UNIT(?) <CPD> { PRMS | PFUN }
:CONFiguration(?) <CPD> { 1 | 12 | 123 }
:L280(?) <CPD> { OFF | ON | 0 | 1 }
OUTP[:STAT](?) <CPD> { ON | OFF }
This command activates or deactivates output terminals.

ON - activates the output

OFF - deactivates the output
If query is sent, calibrator returns ON if the output is active or OFF if it is inactive
Example: OUTP ON - activates the output
OUTP? - the calibrator returns ON or OFF
OUTP:LOWV(?) <CPD> { FLO | GRO }
This command connects or disconnects the Lo terminals of all voltage outputs to/from GND
terminal.

FLOat ungrounds voltage output s

GROund grounds voltage output s
If query is sent, calibrator returns GRO when the output is grounded or FLO when floating.
Example:
OUTP:LOWV GRO
OUTP:LOWV? Calibrator returns FLO or GRO
OUTP:LOWC(?) <CPD> { FLO | GRO }
This command connects or disconnects the Lo terminals of all current outputs to/from GND
terminal.

FLOat ungrounds current output s

GROund grounds current output s
If query is sent, calibrator returns GRO when the output is grounded or FLO when floating.
Example:
OUTP:LOWC GRO
OUTP:LOWC? Calibrator returns FLO or GRO
OUTP[:PHAS]:UNIT(?) <CPD> { DEG | COS }