Matrox DigiSuite LE, Installation Manual, Page: 80 / 140

68
Chapter 5, Configuring Your DigiSuite LE and VTR Settings
Because of the method used to perform the SC/H Phase adjustment,
not all values between –180 and 180 degrees are supported. If needed,
the value you enter will be clipped to the nearest supported value.
Configuring your audio settings
You can select the default DigiSuite LE audio input and output pairs you
want to use with DigiTools and third-party programs. You can also adjust
the gain of your analog audio input pairs. If you have the optional digital
module, you can select a genlock source for your audio.
Note
DigiTools uses only audio Input and Output Pair 1.
Selecting your audio genlock source (digital module
only)
To select the source to which you want to genlock your audio, click the
DigiSuite LE
tab, then the
Audio Genlock
tab.
You can select one of the following audio genlock options:
q Video
Select this option to genlock your audio to the same source
you’re using to genlock video as defined in the
General
dialog box.
This option is suitable for most studio setups.
q Digital Input Pair 1 or Digital Input Pair 2 Select one of these
options to genlock your audio to your first or second digital audio
input pair, respectively. You’ll need to do this when working with a
digital audio player that doesn’t support a video genlock source.