Matrox DigiSuite LE, Installation Manual, Page: 64 / 140

52
Chapter 4, Installing the DigiSuite Software
Update the display driver for your DigiDesktop or
other Matrox display card
If your system includes DigiDesktop or any other Matrox display card
(such as Millennium, G400, etc.), update your Matrox display driver with
the one provided on your DigiSuite CD-ROM before running DigiUtils
Setup. To install the driver, run the setup.exe program located in the
directory named MatroxDisplayDriver\Nt40 on your DigiSuite CD-ROM,
then follow the on-screen instructions. For complete details on installing
software for DigiDesktop, see your DigiDesktop Installation & User
Guide.
Connect your VTR for device control
If you’ll be installing the VTR driver that lets you control your VTR with
DigiTools and Adobe Premiere RT, you should connect your VTR to your
computer as explained in the “Working with Clips Using DigiTools”
chapter of your Getting the Most from DigiSuite manual.
Once the software installation is complete, you’ll need to configure your
VTR settings using the DigiSuite Configuration program as explained in
the next chapter (see
“Configuring your VTR settings” on page 74 ).
Running DigiUtils Setup
The following instructions will guide you through the DigiUtils installation
process. DigiUtils Setup will prompt you to choose a directory in which to
install the DigiUtils files and a location for the program icons. Certain
messages appear throughout the process to inform you of installation
progress or errors.
Some of the DigiUtils Setup dialog boxes feature Back and Next buttons.
These allow you to move in either direction through the installation. If you
wish to change an installation choice in a previous dialog box, move back;
when you’ve finished, go on to the next step.
Step-by-step installation instructions
1
Close Control Panel and all Windows programs.
2
Insert the DigiSuite CD-ROM in your CD-ROM drive.
3
Choose
Start | Run
.
4
In the resulting dialog box, type e:\digiutils\setup (where e:
represents your CD-ROM drive), and click
OK .
5
Follow the instructions that appear on the screen. An information box
indicates when Setup is complete.