Matrox DigiSuite LE, Installation Manual, Page: 65 / 140

53
Installing Video Clipboard for DigiSuite
Note If your computer hangs when Setup scans your system for
installed cards, reboot your computer and run Setup again.
6
When the installation is complete, click OK . Setup will then restart
your computer in order for the changes to take effect.
Installing Video Clipboard for DigiSuite
Inscriber Technology’s Video Clipboard for DigiSuite lets you copy
images to DigiSuite LE from any application that supports the shared
Windows Clipboard. You’ll see the copied images on your Program
monitor when DigiSuite LE is configured to display the graphic frame
buffer (for details, see
“Configuring the video and key output signals” on
page 63 ).
½
To install Video Clipboard for DigiSuite:
1
Close all Windows programs.
2
Insert the DigiSuite CD-ROM in your CD-ROM drive.
3
Choose
Start | Run
.
4
In the resulting dialog box, type e:\videoclipboard\setup (where e:
represents your CD-ROM drive), and click
OK .
5
Follow the instructions that appear on the screen. An information box
indicates when the installation is complete.
6
You must restart your computer in order for the changes to take effect.
To do so, click
OK
when prompted.
For instructions on how to use Video Clipboard for DigiSuite, refer to the
online Help included with the program.
Installing the VFW software codecs for use on a system
without the DigiSuite hardware
The Matrox VFW software codecs let you render (compile) and play back
DigiSuite-compatible .avi files in your Video for Windows programs
without having the DigiSuite hardware installed in your computer.
½
To install the Matrox VFW codecs:
1
Close all Windows programs.
2
Insert the DigiSuite CD-ROM in your CD-ROM drive.
3
Choose Start | Run .
4
In the resulting dialog box, type e:\vfwsoftwarecodec\setup (where e:
represents your CD-ROM drive), and click
OK .