Matrox DigiSuite LE, Installation Manual, Page: 50 / 140

38
Chapter 3, Connecting Your External Devices and Configuring Your BIOS Settings
Video
cable
connector
Top
Bottom
PROGRAM Y/C
PROGRAM B-Y
KEY OUT
PROGRAM COMPS
IN Y1/COMPS1
IN C1/B-Y
IN Y2/Y/COMPS2
IN C2/R-Y
IN Y/C 2
REF IN
PROGRAM Y
PROGRAM R-Y/C
PREVIEW COMPS
PREVIEW Y/C
Note: To connect a single S-Video VTR, use IN Y/C 2.
To connect a second S-Video VTR, use an adapter to
attach IN Y1/COMPS1 to IN C1/B-Y.
q
1 Y/C and 1 composite connection.
q
1 analog component and 1 composite connection.
Warning Simultaneous Y/C (S-Video) and analog component input
and output connections are not supported on DigiSuite LE. IN Y/C2
should never be connected at the same time as IN Y2/Y/COMPS2 and/
or IN C2/R-Y, as this will short-circuit your hardware and damage your
equipment. Similarly, do not attempt to connect PROGRAM Y/C at the
same time as PROGRAM Y and/or PROGRAM R-Y/C, as this will lead
to the double termination of your signals. If you wish to use Y/C and
analog component equipment simultaneously, you must disconnect the
Y/C connector before you connect the BNC connectors, and vice versa.
Remember that you must also change your settings in the DigiSuite
Configuration program as explained in
“Configuring your video settings”
on page 61 .