Matrox DigiSuite LE, Installation Manual, Page: 73 / 140

61
Configuring your video settings
Configuring your video settings
You can customize your DigiSuite LE to meet specific video input and
output requirements. For example, you can select a default video source,
adjust your incoming video signal’s proc amps, and calibrate your video
and key output signals.
Configuring the video input signal
To select a default video source and configure your video input signal,
click the
DigiSuite LE
tab, then the
Video In
tab.
q Video Source Use this list to select your default video source for use
with DigiTools and third-party programs. For example, select
Y/C (S-Video) 1 to use your S-Video VTR connected to Y/C IN 1 as
your default capture source with DigiTools and Adobe Premiere. If
you have the optional digital module, select
4:4:2 (SDI) to use your
digital input source.
q Proc Amp Settings Use these controls to adjust the default proc
amps for your incoming analog video signal. To obtain a precise
setting for a control, click its left or right arrow instead of dragging the
slider. To return a control to its factory default setting, click its
Def
button or
SHIFT+
click the slider.
–
Hue
Adjusts the tint of the colors in the picture. This control won’t
be available if you’ve selected an analog component video source.
–
Chroma Adjusts the vividness (saturation) of the picture’s colors.