Matrox DigiSuite LE, Installation Manual, Page: 39 / 140

27
DigiSuite LE DigiConnect/Audio breakout box
Available DigiSuite LE audio cables
q The analog XLR input/output audio cable (DLITE/XLR/CBL) and the
analog RCA input/output audio cable (DLITE/RCA/CBL) both
provide four input and output connections.
q
The digital input/output audio cable for use with the optional digital
module (DLE/DIG/AUD/CBL) provides two stereo AES/EBU inputs
and outputs.
DigiSuite LE DigiConnect/Audio breakout box
Prepare for mounting
You have two choices for mounting your DigiConnect/Audio breakout
box, either desktop or standard 19” rackmount.
Important Make sure you use the correct screws for each mounting
method. If you use the wrong ones, you can damage your equipment.
Compare the length of the supplied screws. Use the four long screws only
with the desktop-mount pedestals.
Attaching the desktop pedestals
1
Unpack the two desktop pedestals and their four long mounting
screws.
2
Line up each pedestal with its respective screw holes on the bottom of
the breakout box.
3
Using a hand screw driver only (no power screwdrivers), carefully
tighten each screw until snug. Do not overtighten!
DIGITAL
1 2 3 4
600
OHM
600
OHM
600
OHM
600
OHM
ON BAL
OFF UNBAL
ON BAL
OFF UNBAL
ON BAL
OFF UNBAL
1/2 3/4
AES/EBU
1/2 3/4
AES/EBU
IN IN OUT OUT
ON BAL
OFF UNBAL
ANALOG
1 2 3 4
Digital Video Solutions