Matrox DigiSuite LE, Installation Manual, Page: 51 / 140

39
Typical DigiSuite LE video connections
Digital video cable
Typical DigiSuite LE video connections
Important Make sure that you insert your DigiSuite LE analog video
cable or video breakout box cable into the proper bracket connector. Refer
to
“Identifying your connectors” on page 24 to locate the video bracket
connector on DigiSuite LE.
Illustrations in the following section show some typical video connections.
In these illustrations we’ve connected a Program monitor (NTSC, PAL or
digital) to view the signal that will be recorded, as well as separate source
and record decks. You may, however, use the same deck as both your
source and record device by making the input and output connections to a
single deck.
Digital
video
cable
connector
REF LOOP OUT
SDI KEY OUT
SDI IN
REF IN
SDI OUT
Bottom
Top
Source External
sync source
Program
monitor
Recorder