Matrox DigiSuite LE, Installation Manual, Page: 49 / 140

37
DigiSuite LE cables
sure the termination switch on DigiSuite LE is set to Hi Z (see “Set the
termination switch on DigiSuite LE” on page 14 ).
Video outputs
The DigiConnect/Video breakout box for use with DigiSuite LE supports
any of the following combinations of video output connections:
q 1 S-Video and 1 composite connection (Preview).
q 1 S-Video and 1 composite connection (Program).
q
1 analog component connection (Program).
Preview output
The preview output signal is always present at both video preview output
jacks.
Program output
The PROGRAM OUT switch allows you to choose analog component or
S-Video and composite for your output connections.
DigiSuite LE cables
Analog video cable
The DigiSuite LE analog video cable, shown below, supports any of the
following combinations of video connections:
q 2 Y/C (S-Video) connections.
q
2 composite connections.
REF
75-ohm terminator (supplied)
S-VIDEO COMPOSITE
PREVIEW OUT
R-Y B-Y Y S-VIDEO COMPOSITE
PROGRAM OUT MODE