Matrox DigiSuite LE Installation Manual Download Page 2 | Manualshive

Page: 2 / 140

Matrox DigiSuite LE Installation Manual Download Page 2

Matrox

®

, DigiSuite

®

, and Movie-2

®

are registered trademarks of Matrox Electronic Systems Ltd.

DigiSuite LE™, DigiSuite DTV™, DigiMix™, DigiMotion™, DigiDesktop™, DV-1394™, DigiTools™, DigiUtils™, and
DigiView™ are trademarks of Matrox Electronic Systems Ltd.

Millennium™ and G400™ are trademarks of Matrox Graphics Inc.

3D Studio MAX

®

is a registered trademark of Autodesk, Inc.

Acrobat

®

Reader Copyright © 1987-1999 Adobe Systems Incorporated. All rights reserved. Adobe and Acrobat are

trademarks of Adobe Systems Incorporated, which may be registered in certain jurisdictions.

Adobe After Effects™ and Adobe Premiere RT™ are trademarks of Adobe Systems Incorporated.

DirectShow™ and Video for Windows™ are trademarks of Microsoft Corporation.

Discreet™ and edit*™ are trademarks of Autodesk, Inc.

Genie™ is a trademark of Pinnacle Systems Inc.

Incite

®

is a registered trademark of Incite Multimedia Corporation IMC Inc.

Inscriber

®

is a registered trademark of Inscriber Technology Corporation.

Inscriber/CG Supreme™ and Video Clipboard for DigiSuite™ are trademarks of Inscriber Technology Corporation.

Intel

®

and Pentium

®

are registered trademarks of Intel Corporation.

LightWave 3D™ is a trademark of NewTek, Inc.

Microsoft

®

and Windows NT

®

are registered trademarks of Microsoft Corporation.

On-Line Express™ is a trademark of is a trademark of United Media Inc.

Speed Razor RT™ is a trademark of in:sync corporation.

TriMedia™ is a trademark of Philips North America Corporation and Philips Electronics N.V.

All other nationally and internationally recognized trademarks and tradenames are hereby acknowledged.

Copyright © 1999 by Matrox Electronic Systems Ltd. All rights reserved.

Disclaimer

Matrox Electronic Systems Ltd. reserves the right to make changes in specifications at

any time and without notice. The information provided by this document is believed to be accurate and
reliable. However, no responsibility is assumed by Matrox Electronic Systems Ltd. for its use; nor for any
infringements of patents or other rights of third parties resulting from its use. No license is granted under
any patents or patent rights of Matrox Electronic Systems Ltd.

Matrox Electronic Systems Ltd.
1055 St. Regis Blvd., Dorval, Quebec, Canada H9P 2T4
Tel: (514) 685-2630

Fax: (514) 685-2853

World Wide Web:

www.matrox.com

«
1
2
3
4
...
»

Summary of Contents for DigiSuite LE













































































































































Reviews:

No comments