Matrox DigiSuite LE, Installation Manual, Page: 40 / 140

28
Chapter 3, Connecting Your External Devices and Configuring Your BIOS Settings
Attaching the rackmount brackets
1
Unpack the two rackmount brackets and their eight short mounting
screws. Do not use the long screws!
2
Line up each bracket with its respective screw holes on the side of the
breakout box.
3
Using a hand screw driver only (no power screwdrivers), carefully
tighten each screw until snug. Do not overtighten!
Connect DigiConnect/Audio to your computer
Attach the two connectors on your breakout box cable to the correct jacks
on the backplate of your installed DigiSuite LE and digital module (if
applicable). Tighten the thumb screws until snug to ensure a stable
connection.
Right rackmount bracket Left rackmount bracket