MacDon R1 Series, Operator'S Manual

Page: 234 / 346

215333
218
Revision A
1016455
A
Figure 4.190: Cutterbar Spindle
11. Install retaining ring (A).
1024915
C
A
B
Figure 4.191: R116 PT Cutterbar
12. Depending on the type of disc with the new shear pin, refer
to the applicable disc installation procedure:
•
Install cutterbar disc (A). For instructions, refer to
Installing Cutterbar Discs, page 155 .
•
Install driven drum (B). For instructions, refer to
Installing Large Driven Drums and Driveline
–
R113 or
R116 PT, page 204 .
•
Install non-driven drum (C). For instructions, refer to
Installing Large Non-Driven Drums
–
R113 or R116 PT,
page 210 .
WARNING
Ensure the cutterbar is completely clear of foreign objects.
Foreign objects can be ejected with considerable force when
the machine is started and may result in serious injury or machine damage.
1010658
Figure 4.192: R1 Series Rotary Disc Pull-Type
13. Close cutterbar doors. For instructions, refer to 3.3.3
Closing Cutterbar Doors, page 38 .
MAINTENANCE AND SERVICING