215333
72
Revision A
1023734
1023734
A
Figure 3.77: Lift Cylinder Lock-Out Valve in Closed
Position
6.
Close the lift cylinder lock-out valve by turning handle (A) to
the closed position (90° angle to the hose). Repeat on
opposite side.
7.
Disconnect all hydraulic hoses (refer to
for instructions), and disconnect
electrical wiring harness.
Converting from Field to Transport Mode
–
with Road-Friendly Transport
™
DANGER
To prevent serious injury or death, do NOT convert the machine into, or from transport mode until all people, animals,
and objects are clear of the unit
’
s rotational range.
DANGER
Stop the power take-off (PTO) before converting the unit into transport mode. The cutting discs continue to spin after
the drive is turned off.
CAUTION
To prevent injury or equipment damage, ensure cutterbar doors are properly closed before converting the machine
from field to transport mode.
IMPORTANT:
In some jurisdictions, having tall crop dividers installed can make the rotary disc pull-type too wide for public roads when in
transport mode. If necessary, remove the dividers, and reinstall them after the machine is transported. For instructions,
refer to
