215333
254
Revision A
4.5.10
Conditioner Drive Belt
The conditioner drive belt is located inside the left driveshield and is tensioned with a spring tensioner. The tension is
factory-set and should not require adjustment.
Inspecting Conditioner Drive Belt
Check the belt tension and inspect for damage or wear every 100 hours or annually (preferably before the start of the
cutting season).
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
1.
Lower the rotary disc pull-type fully.
2.
Shut down the engine, and remove the key from the ignition.
1010709
A
Figure 4.274: Left Driveshield
3.
Open left driveshield (A). For instructions, refer to
1022897
A
B
C
Figure 4.275: Conditioner Drive
4.
Inspect drive belt (A) and replace if damaged or cracked.
5.
Check that jam nut (B) and adjuster nut (C) are tight.
